How to Replace Bulkhead Doors

That’s why the best way to replace bulkhead doors in your business is with high quality, pressure-treated lumber that’s been treated with a high-quality pressure-treated adhesive. Pressure-treated lumber will not warp or crack under stress as it does with other materials. If you have any questions about how to replace bulkhead doors, don’t hesitate to call a local door company or dealer.

When you talk with door dealers or manufacturers, be sure to ask what exactly is being used to treat the bulkhead. If you want, you can find out about the specific sills, hinges, and pressure-treated lumber used for your door by asking questions. Ask about the wood fibers and silicone sealant that are being used inside and out of the door. You may even learn that your door is sealed at the bottom to prevent water from seeping in.

The doors do not have to be new to be safe, either.

There are some older doors that can still be repaired and restored. In fact, doing the repair and restoration of your doors is often cost-effective and can be just as pleasing to the eye as a brand new replacement door. One reason you might consider repairing older doors is because you don’t have to go through all of the trouble of replacing the wood, which can get old after time. Your doors can be restored to look just like new by adding some fresh coat of finish to the wood, using new hardware, repainting if need be, and applying a custom silicone sealant.

Of course, if you are in the market for new replacement doors, you need to know about the different types of doors available. The two basic materials for doors today are wood and fiberglass. If you want to avoid buying an old door and then having to refurbish it, fiberglass is probably the way to go. Wood bulkhead doors are nice because they have a classic look and are easy to keep clean and maintain over time.

When it comes to how to replace your doors, it is also important to realize that doors do not have to be of the same style as what you currently have.

For example, if you have oak bulkhead doors, you can easily change over to a fiberglass door without making any other changes to your existing doors. This is because fiberglass is much more modern looking than oak and also much easier to care for. However, if you want to keep your old oak doors and make any other changes to the room, you are free to do so. All you really need to know how to replace these doors is to be able to identify the part you need to buy, find the correct size door, and figure out how to install it.

One of the most common methods on how to replace bulkhead hinges is through a jamb operator.

These devices work by using a spring and a shaft to lift up the entire door and then lower it back. It sounds complicated, but with a little practice and the right tools, this can be done quite easily. The parts required for the operation of a jamb operator are: a shaft and a rod, a lock, and two or three wooden spindles. Once you have these parts, your door is ready to be opened and closed, as long as you have a jamb operator installed.

Replacing bulkhead hinges isn’t difficult when you have the right tools and know-how.

The most difficult part of the operation of a bulkhead door, especially if it is an older door, is trying to find the correct part. You should not have any problems unless you have damage to the door itself, such as dents or cracks in the wood that are beyond repair. If you suspect that you may have damage to your bulkhead, you should contact a door specialist and see what he or she recommends for your situation.

The post How to Replace Bulkhead Doors appeared first on Homeib.

There are many people who don’t like the traditional style of up and over garage doors and they look out for unique designs. Sectional garage doors offer the highest convenience and it can be the best solution for garages. In this article we will discuss the key benefits of sectional garage doors and readers should not miss it.

#1. Provides Security:

Security is one of the most important things when it comes to garage doors. Sectional garage doors offer the highest security to the homeowners and it is one of the most secure designs that make it truly popular among the buyers. It feature lesser penetration points and closed structure which is very hard to breakthrough. Sectional garage doors will provide the highest security for both the house and the garage, which makes it truly beneficial. The doors can be fitted with advanced locking features and if you are wondering about the key benefits of sectional garage doors, this is one of them.

#2. Efficiently Uses the Space:

Sectional garage doors efficiently utilize the space and their compact design makes them ideal for limited space. sectional garage doors glide open vertically and save a lot of space. It offers more convenience compared to the traditional overhead doors and if you have limited space for a garage, this will be an ideal choice. Sectional garage doors do not expand beyond the doorway which results in unrestricted access for another car parking.

#3. Materials:

Homeowners can choose from a wide variety of materials, which makes it suitable for every buyer. Some people may think choosing the right sectional garage door will be tough but in reality, it is very easy. There are multiple materials like fibreglass, timber, steels and others that suit a variety of styles easily. Homeowners can install insulated panels to prevent heat loss and the advanced features can help them save money on the energy bills.

#4. Visually Attractive:

Sectional garage doors are available in a wide range of styles and colours and they can enhance the visual appeal of the house. Aesthetics is very important for the homeowners and it gives a classic appearance that makes it truly advantageous for investment. Nowadays homeowners can also replicate the doors with wooden prints and in case readers are wondering about the key benefits, the aesthetic value is one of the key benefits.

#5. Automation Features:

Manufacturers are trying to comprise advanced features into sectional garage doors and the automation features have taken it to a whole new level. Automation features can be enabled during installation or people can also upgrade later. Homeowners can operate the garage door with the help of an electric remote control opener and homeowners won’t have to come out of the vehicle to open or close the garage doors.

The above mentioned benefits have popularized the use of sectional garage doors in the recent years and we hope readers have got an idea on the same. Manufacturers use quality materials that make the sectional garage doors highly durable. By investing in sectional garage doors, homeowners won’t have to spend on costly maintenance. All these advantages make it an ideal solution for the garage. In case you know someone who is looking for information on this topic, you can share this article and help them learn the advantages.

The post What Are the Key Benefits of Having Sectional Garage Doors? appeared first on Homeib.

Indicative of the name these doors are made of hard and durable materials that give them sturdiness. In addition, they feature a lot of modern facilities and techniques that make it easier to detect attempted thefts. These security gates are structured with metals like stainless steel, rough iron, alloy and aluminum. It is very hard to break these gates by any intruders, and if they find these gates at your entrance then they do not intend to enter your premises.

What are the features of the security gate?

• Durability and sturdiness: Even the best of the security doors won’t have any good functions unless you plan on getting a sturdier piece. A flimsy door would easily break and allow thefts to happen with ease. The best way to go about this is to ensure that you get doors from quality vendors that are heavy and not easily breakable. So think of materials like wood, steel, iron, etc.

• Auto locking systems: The other benefits of these security doors are the auto looking systems. These are basically options or a technically advanced mode that locks the door on its own when you exit the house. So even if you are leaving in a hurry and forget to lock your gate then this auto locking system will lock your gate after closing.

Security measurement for your main entrance:

• Number or password protected: Another benefit of these doors is that you don’t have to worry about crying the key with you all the time. In fact, these doors feature usually on electricity and also have battery modes that last for months. These security doors unlock with a fixed password and these days you also get ones with sensor and thumb print impressions too.

• Original keys: Another feature of security door is that they only open with the original keys. These gates are designed with two or three sets of keys and each of your family members can carry their own keys. Therefore, if you lose your own key, then also you can open the gate with an alternative key. There is no way to break the gates or locking system to replace the locks, because you have plenty options to open your gates.

• Alarms: There are also advanced alarm systems available on these security doors. The task of these doors is to give warning sound when there is an attempted theft or burglary. These alarms can be connected to local police stations, your phones or even to other systems. Hence the loud sounds go off as there is an attempted burglary, which should be enough to warn everyone.

Additional advantages of security gates:

• They will not lead to an increased cost on your electricity bills.
• These doors also come in a plethora of styles and patterns. So you are not really hindering the decorative aspect of your home.
• There is no maintenance cost required for this security gates.

So whether or not you live in a high crime rate neighborhood it is important that you invest in these security doors to ensure that you are able to minimize the risk of the same.

The post How to Choose the Right Security Doors for Your Home appeared first on Homeib.

1. Durability

Doors that are made out of wood easily shows aging signs if they are exposed directly to sunlight as well as rain. In just a couple of months, the surface of your wooden door will begin to display irregular colors, white patches as well as flaking. Further, wood has this natural propensity to contract and/or swell as a response to climate changes. UPVC doors, on the contrary, do not give in to changes in weather. UPVC exterior doors are resistant towards typical wear and will not chip or flake like wood doors. These doors can also last very long, and because of that, they do not need frequent replacement.

2. Energy Efficient

UPVC doors provide exceptional insulation benefits. Not like wooden exterior doors, there are unique insulation materials embedded into UPVC doors, meant to keep the inside of any home warm and cozy. By having UPVC doors installed in your home, look forward to a significant decrease in your utility bills, as these doors can help maintain heat inside your property.

3. Pest-Resistant

Wooden exterior doors are highly susceptible to attacks from termites as well as borers. Because of this, wood doors have to be treated regularly with preventive agents. The treatment of wooden doors is not only going to be time consuming, it can be very expensive as well. Hence, you need to consider having UPVC doors installed in case you are dealing with pest problems.

4. Low Maintenance

Unlike wood, UPVC is an extremely long lasting and durable material, with waterproof qualities that efficiently prevents damp. Moreover, UPVC doors need no regular varnishing at all, just so to retain their shine, unlike wood doors. A simple wipe of the surface using a clean cloth can already bring back their shimmer.

5. Affordability

What truly separates UPVC doors from other types of doors is the fact that they do not rely on physical or manual craftsmanship. These doors are systematically molded via machine based on precise style and design specification. This is actually what makes these doors accessible at a portion of the cost of wooden exterior doors. Not like wood, UPVC doors also come readily available in various sizes, colors and styles.

Whether you are in the market for improving your home with the use of patio, storm doors or other types, doors made of PVC are the perfect choice. These doors made out of this type of material will stand the test of time and will actually possibly be the last door that you will have to buy for your house. I recommend using these types of doors on every exterior doorway that you have in your home — especially if you live in a harsher environment with varying weather conditions that can have a huge effect on your home.

The post Choosing the Right Door for Your Home: The Advantages of UPVC Doors appeared first on Homeib.

Below are some of the most common signs that a garage door needs to be repaired. A garage door repair company can solve any of these problems right away so that you avoid having to do major repairs later that are more expensive and take more time.

1. Does Your Door Not Fully Close?

When your door does not close all the way it can point to a simple problem such as needing to remove an obstruction by the door. Most garage doors have sensors that cause them to automatically open if there is an obstruction. This is a safety precaution so that the door does not hurt small children, pets, or cause damage to your car.

However, if you do not see an obstruction then it could be that the sensors are broken in the garage door. Another possibility is that the garage door cables have become broken or damaged. If you experience any of these symptoms you should call a local Orlando garage door repair company right away.

2. Does Your Door Squeak When It Opens or Closes?

A squeaky door often requires lubricants near the doors hinges, bearings, rollers, cables, or pulleys. While some people can easily apply lubricant on their own, it is important not to do so if you believe the problem goes beyond simple lubrication. While it seems like a small job a garage door repair company can easily come in to lubricate and maintain your door if you are not confident in doing it yourself.

3. Does Your Door Make Noises When It Opens And Closes?

Garage doors can sometimes make scraping or grinding noises when you try to open or close them. Noises such as these can mean any number of things including problems with the cables, rollers, springs, or an uneven reinforcement. Unfortunately, it is difficult to make an assessment on a noisy garage door yourself so you should always call a professional to diagnose this type of problem.

4. Does Your Door Move Slowly?

While a garage door should never move too fast it can become a problem when the door moves too slowly. A door that moves slowly can signal that the springs in the door need to be replaced. Springs that need replacing should be changed immediately because over time they could end up damaging the door further until the door stops working at all.

5. Are There Any Cracks or Damaged Areas on Your Door?

Cracks and damages in the door should also be fixed quickly. Not only can cracks lead to security issues but if the crack or damage becomes worse it can lead to the entire door system becoming damaged. Think of a crack in your windshield. You understand that a windshield crack needs to be fixed right away so that the crack does not spread and break the entire window. The same is true of a garage door.

If you experience any of the above signs it could mean that your garage needs to be repaired. It is better to repair a door sooner rather than later because overtime the door could breakdown further and end up costing you a lot more money to fix. Monitor your garage door closely and if you come across any signs of disrepair call your local technician right away.

The post Top Signs Your Garage Door Needs to be Repaired appeared first on Homeib.

How to Keep your Garage Door Quiet

A noisy garage door doesn’t always mean a broken garage door, it’s very likely that all that’s needed is careful inspection and a few minor maintenance steps for your garage door to return to normal.

Stop Vibrations By Tightening Loose Areas

Whenever a garage door is used, vibrations occur. These vibrations can in turn cause screws to loosen throughout the entire garage door system, and contribute to increased noise during function. A few of the most common areas to check and tighten are:

• The ratchets connecting the garage door panels
• The roller’s brackets which need to be tightened with an open ended wrench or ratchet

Lubricate On A Regular Basis

Rust and a lack of adequate lubrication can also create noisy garage door operation. To prevent this, it’s advisable to use a lubricant specially designed for garage doors on each of your garage doors system’s moving parts at least 2 or 3 times a year at 4 to 6 month intervals.

Be sure to use your garage door manual as a guide to which areas need lubrication. Wipe away any old grease, then apply fresh lubricant. Make sure to remove any extra lubricant or grease to avoid the risk of lubricant dripping or spilling onto anything inappropriate.

Note of caution: Don’t use a regular machine grease such as WD40 or anything with a weight heavier than 10W because if used it can create a build up of dirt and dust that may lead to door and/or opener failure. Instead apply a GDL (garage door lubricant), white grease (Lubriplate) or any other light weight oil of 10w or less. Solution Garage Doors in Montreal works diligently to repair and maintain all types of garage doors

Typical garage door lubrication areas:

1. Steel rollers (don’t lubricate poly rollers)
2. Roller stems
3. All pivoting portions of the garage door hinge
4. The springs (once the door has been lowered)
5. The bearings in the end fixture area through which the torsion spring’s tube goes

You may also have to lubricate these areas of your garage door opener as well:

Typical garage door opener lubrication areas:

1. Front idler sprocket located around the springs
2. The top of the opener’s rear sprocket
3. Screw or chain drive area (may require the use of white operator grease depending on manufacturer’s recommendations)

Testing and Adjusting your Garage Door Opener Tension

If your garage door isn’t holding up at the half way position or it’s coming down too heavily, the tension may be the cause. An incorrect tension level can lead to serious injury and even death if neglected. Two ways to inspect and adjust your garage door’s tension are to:

1. Put something in the path of the door such as a board or box, when the door touches the item the door should immediately rise. If it does, your door is operating safely. However, if the rising doesn’t occur immediately the tension on the door opener needs to be adjusted. Look for the garage door’s pair of switches and either increase the tension by adjusting the counter clockwise switch or decrease the tension with the clockwise switch.
2. If you find that the tension still needs correction, the next step is to pull the disconnect switch (it’ll be red) to disengage the opener. Then manually lift the door to check the tension again. If the door is easy to lift and it’s able to hold itself up at the half way point the tension is correct. If the tension still needs adjustment close the garage door and continue the process.

If your garage door has it’s tension spring positioned on an arm located above the garage door, the pulley’s set screws will need adjusting. In this case you’ll need to make adjustments with the door in a fully open position to make sure the springs aren’t under any tension. However, for safety purposes be sure to clamp a block or board into the roller to keep the garage door from coming down unexpectedly. Release the cable drum screws’ tension, then increase the tension by tightening the tension spring.

This needs to be carried out on both sides, making sure not to tighten by more than 1/2 a turn on each side at a time. After each turn, tighten the screws as well and follow by checking to see if the door can then hold a half way position. If it can hold this position, the tension is perfect.

Garage Door Failure Causes and Their DIY Fixes

If you’re short of time, you may want to check through this quick list of problems and their solutions that you can implement on your own before giving us a call.

If a garage door is giving you problems going down, coming up or staying at it’s halfway point, then:

1. See if the remote needs fresh batteries.
2. See if the safety sensors (eyes) on your garage door are working properly. Probably located near the ground on each side of the garage door, one eye will usually emit a green beam and the other will emit a red beam. Make sure there isn’t anything blocking these ‘eyes’ and check to see if they’re in proper alignment. If miss-aligned, align correctly so they face each other than tighten the ratchets that hold them in place. Also clear away anything that’s blocking the eyes.
3. Check see if your garage door and opener are getting adequate power by inspecting the cables making sure they aren’t frayed or damaged and also if the circuit breaker has been tripped.
4. Check your garage door opener’s up limit switch position. Also inspect the other limit switch as both of these manage the force your garage door opener uses to open and close the garage door.
5. Check and tighten the screws on all the hardware connecting the garage door to it’s opener. Use eventually loosens these screws over time and should be inspected and tightened regularly.
6. The position of the rail’s micro switch needs to be correct otherwise the door may not open or close like it should. In this case, try sliding it up or downward into the right position till your garage door closes and opens normally.

The post Guide to Garage Door Maintenance appeared first on Homeib.

They want to achieve the said task without shelling out huge sums of money for new garage doors and metal parts such as custom springs, metal tracks, mounting brackets, and screws, among others. This is important because garage door replacement is an important aspect that concerns many home owners.

Putting the said factor into consideration, a clear understanding of garage replacement expenditure is important to those who want to achieve the right garage door replacements without ruining their monthly budgets.

Cost of Garage Door Replacement

In general, the kind and model of the garage door that will be installed establishes the total cost of the replacement unit. The garage doors that are out on the market come in different forms but the most common are inclined and roll up models. The former cost less than the latter and interested individuals are encouraged to invest on it to save up some cash.

Inclined models usually cost around USD 500 to USD 700. Their features are very commendable since they are lightweight and are manufactured to withstand the test of time.

On the other hand, roll up wooden doors can be purchased at around USD 800 to USD 1,000. They are more expensive than inclined doors because they are elegantly produced to deliver a more stylish, elegant, and natural look.

The downside is clients to shell out huge sums of money to achieve the said attributes. However, this will not be a problem for those who have unlimited funding.

Cost of Garage Door Replacement Components

Other things that should be taken into consideration when replacing garage doors is the cost of repair components like as custom springs, metal tracks, mounting brackets, and screws.

It is a good thing though that tried and tested companies offer them at very affordable prices. For this reason, interested individuals can save up substantial amount of money for labour and other related expenses.

Conclusion

Overall, it can be concluded that taking heed of the tips and pointers that are explained above can be very essential when it comes to getting the right garage door replacement units and saving money along the way.

These benefits are extremely advantageous nowadays, especially since many are looking for practical yet aesthetically appealing home improvement decorations for their homes.

The post Things to Consider When Replacing Garage Doors appeared first on Homeib.

For example, one of the easiest and less expensive types of do it yourself projects, includes upgrading your patio area by installing patio doors. Patio doors are extremely easy for a professional to install, and offer a wonderful addition to your home.

When you are ready to purchase and have your patio door installed, you may find yourself unsure of where to begin. Home improvement stores offer a large selection of patio doors for installation from hinged patio doors to gliding patio doors, which can be overwhelming.

However, if you plan ahead and take the time to understand the differences between the various doors, it will help ensure that when it comes time to make your purchase, you will select the best door for your home.

Hinged Patio Doors

Hinged patio doors are a popular selection for your outdoor patio for many reasons.

One of their biggest appeals is the conventional way in which they open and close, just like your regular door. Having a door designed to out swing can save much needed interior space and offer ease of use. Another large benefit of the hinged patio doors is in the traditional design, which allows for the addition of decorative touches. The various types of hinged patio doors offer other feature selections since they come in single and multiple pane designs.

Gliding / Sliding Glass Doors

On the other end of the spectrum for choices in patio doors are gliding doors, which are also referred to as standard sliding glass doors. If you are thinking about installing patio doors that glide, one consideration to remember is whether the space you have, will allow for the wide track needed for the doors to glide open and shut.

Gliding glass doors offer the benefit of being highly customizable, offering potential buyers the choice of glass, patterned glass, art glass, decorative grilles, expanded hardware, and various size options. Some of the sliders available today even come with built in blinds, which are nice for areas that receive an overabundance of sunlight or that require privacy. If you are wondering about the built in blinds, I will explain.

Since sliders are double pane, manufacturers are able to place blinds (they look like mini-blinds) between the glass. The operating mechanism is externally located so you can open and close the blinds located within the interior and exterior glass. These types of sliding glass doors are perfect for backyard decks, beach houses, and even balconies.

Remember that…

Regardless of whether you decide to install sliding glass doors or hinged patio doors, it is important to remember that the doors need to be positioned in an area where there is a natural flow of traffic. Placing doors that are out of the way of natural traffic can disturb the natural flow and throw off the decorative balance of your home.

Installing patio doors are an easy way to spruce up your home while offering visitors an easy way to access your patio, balcony, deck, or outside area while spending time at your house. When you are ready to begin the process of installing patio doors, always remember to use a qualified professional that can seamlessly install your patio doors with ease.

The post Tips for Selecting the Perfect Patio Door appeared first on Homeib.

Here are some tips for cleaning your garage door:

When to Clean and the Materials to Use

Cleaning your garage door is very easy, and it’ll only take you half an hour to get the job done. You also don’t need special tools when cleaning the garage door as all you will only need your regular cleaning materials. If there are rusty spots in the garage door, you will also need sandpaper or steel wool to scrape away the rust. For the tracks and other moving parts, you will also need a lubricant.

Your garage door needs to be cleaned at least every six months. However, if you live in an industrial area or if you live near the sea, then you might need to clean it four times a year. This is because dirty air from the fumes as well as the higher salt content in the air from coastal areas can easily cause rusting.

Steps in Cleaning Garage Doors

Before you wash the whole garage door, you first need to check the garage door tracks as well as the moving parts like hinges and rollers. Use a clean rag to wipe away soot, oil, and grime; and if there is rusting, then you can use the sandpaper or the steel wool to get rid of it.

Once done, wash all surfaces with a mild detergent and water. Thoroughly scrub soot and grime away with a stiff brush, and rinse it off with clean water. After you’re through with the exterior, you can proceed with the interior.

When it comes to applying the lubricant, see to it that you’re only using lubricants specifically made for garage doors, a good example of which is white lithium grease. You need to apply lubricants to all moving parts, such as the roller wheel bearings as well as the garage door tracks and the axles and all the hinges. Once done, wipe away the excess lubricant then test the garage doors by opening and closing it. It’ll spread the lubricant further to the hard-to-reach areas. It’ll also assure you that the moving parts are working well.

Need Repairs?

In addition to cleaning the garage doors, you should also take the opportunity to check and see if there are parts that need replacement. Some of the most common problems are broken garage door springs and cable, damaged garage door section, as well as busted transmitters and circuit board.

If you have the technical know-how to replace these parts on your own, then you can easily do so. If not, then it’s advisable that you hire a reputable provider who can repair or replace garage door parts for you. You don’t want to do more damage to it as this can cost you more money.

The post How to Clean Your Garage Doors appeared first on Homeib.

Homes tend to make us feel safer and we love remaining in the secure confines of home, doing anything that pleases us. Most of the times, we usually focus on enhancing the aesthetic appeal of our homes and forget about safety concerns. It is one of the most common mistakes we make, which leaves us at a greater threat of theft or burglary.

Importance of Door Security

When dealing with home safety and security, the entry to your home is a major concern. Doors are a part of only one third of the total exterior, but these serve as major entry points for some of the most disastrous break-ins and thefts. Sporting a perspicacious attitude towards door security and your own safety can help you evade most such untoward incidents.

Doors are the medium to separate out prying fingers and curious, pernicious eyes from entering your household. If you value your home security and wellbeing more than anything else, its time you install a sturdy door and help your home become the safe haven it is. It is also imperative to ascertain whether your front door and door jamb as strong enough to prevent unwanted entries and safeguard your homes.

DIY Door Installation

Sometimes, most of us end up overestimating the impact of any task and leave it completely on professionals. Tasks like door installation for safety are not as tough, as often perceived. If you’re looking to install your door on your own, here’s a step-by-step guide to effective installation of an entry door in your home:

Step 1: Clear out the door way

The first and foremost step to executing door installation is to get rid of any excess drywall around the door way. You can trim it off, so that the door way is all smooth and ready for another door to be installed neatly.

Step 2: Level out the Floor

Make sure your floor is all level and smooth. If your floor needs to be levelled out furthermore, consider marking for shims to make the floor appear smooth and plain. Make sure you determine the right locations for shims, and impeccably execute the process further.

Step 3: Determine the size of door and remove packing materials

Once you’re done with cleaning up the door way, consider cutting the door to the right length after determining the proper size. You would need to remove the packing material and the plug that comes on the pre-hung door. Ensure that you get rid of stray packaging material and only then proceed with further installation.

Step 4: Attach Shim and position the door

Get started with the main installation by tacking a nail on the shim in the doorway. Soon after you do that, position your door and place it inside the opening. Make sure your door is plumb and your door is able to swing open easily. Secure the jamb along its length with the help of nails and check the door opening. In order to leave room for further adjustments, place a shim by the bottom hinge.

Step 5: Nail the Door in Place

You can complete the door installation easily by nailing the door in place and filling up the nail holes. Make sure you check the door and ensure that it opens and shuts properly.

This step-by-step guide fits for wooden doors that can be easily nailed in place. If however, you have a metallic door with an automated lock, you may have to weld it to your metallic hinges. Welding is often perceived as a challenging task that requires proper care. You can easily go about with DIY welding, after careful considerations. Read along how to weld on your own:

Step 1: Get your Equipment

A 230 volt, 50-amp electrical outlet can easily support your initial welding operation. Head towards a welding supply dealer and get yourself an electric arc welder. You would need welding rods and a basic E6011 rod would do well. A carbon arc torch would be required if your door installation requires brazing. If however, you need welding rods for cutting purposes, consider choosing E6010 rods for the same.

Step2: Welding Safety

You would know that welding is the delicate dance between heat, metal and equipment. Make sure you execute this crafty task after proper safety considerations. Some essentials to remember while welding include:

• Wear welding safety clothing, which comprises of safety gloves, eye wear and head gear. Do not wear open-toed footwear lest you get burnt by weld splatter.
• Wear full-sleeved clothes to evade stray weld splatter.
• Perform your welding operations in a well-ventilated welding workstation that prevents toxic air build-up.
• Make sure your equipment is good quality and the wires are of proper gauge.
• Avoid welding under the direct rays of sunlight, if you’re welding in the patio and choose to keep plenty of water close to you so that there is no chance of dehydration.
• Avoid wearing synthetic fibres that can easily catch fire
• While welding your door, make sure you isolate the welding place from the rest of your home. You can also use welding curtains to avoid weld splatter around your home.
• Remove curtains and avoid welding in cluttered surroundings. There should be no clutter around your welding workstation and the area should be perfectly clean and clear.

Step3: Execute the Welds

Read the welding manuals before starting, as the welding process may vary differently for any welding equipment. Have someone help you hold the door in place and use clamps and weights to further hold it in place. Tack the metal pieces well and avoid warping. Begin with slow and steady feed cuts and pay attention towards the ‘Duty Cycle’.

A few welds would be good enough to have your door in place. Make it a point to pay proper attention to welding safety. If the welding and fixing processes leave your door unkempt, make it a point to coat your door with some beautiful paint. Avoid any experimenting and if you still don’t feel confident about welding DIY, avail some professional services!

A sturdy door would help in enhancing your home safety and make your homes safe havens. Make it a point to install firm doors with safety locks. Let no prying visitor take advantage of your noisy hinges and weak doors and threaten your home safety.

The post DIY Door Installation: How to Go About It? appeared first on Homeib.