Manufacturing is an industry built on getting the most out of the resources available. That means maximizing the productive hours of workers and stretching materials as far as can be safely managed. The idea of reusing materials and of industrial asset recycling isn’t new. In fact, many plants rely on recycled materials, reclaimed components and refurbished machinery. While this might seem like cutting corners its basis is more focused on saving money on equipment and materials in an effort to be more cost effective. Normally, that savings is passed on to the consumer in the form of lower retail prices or greater quantity of product.
Industrial asset recycling can take many forms, from the aluminum cans we use to the paper we write on and the machinery used to make them both. Industrial asset recycling began as an answer to demands for more environmentally friendly manufacturing methods, preservation of non-renewable resources and a reduction on the demand for new raw materials. What many manufacturers found as a result was that not only did their public image improve but their costs were lowered as well. This has become such common practice that even in the event of machinery breakdowns, most plants resell, recycle or reuse the components afterwards which can either enable other manufacturers to begin production or reduce the cost of operations for a company.
All of these are good, overall, for the economy of a community and for the benefits of the employees tasked with overseeing the production line. Few paper mills, metal foundries or tire factories are utilizing entirely raw materials. Most of the products coming off their lines are at least partially recycled content. Industrial asset recycling has gone so far as to create new uses for recycled materials. For example, rubber which is no longer suitable for use in tires is now turned into padding for carpet, fill for playground equipment and a variety of other products.
The culture of manufacturing has taken on a whole new way of thinking in recent years, focused now on reducing waste and improving efficiency. If materials can be sourced at a lower price but still retain the quality, many manufacturers will choose that method or source. It’s estimated that manufacturers today spend approximately thirty percent less on materials than they did just twenty years ago, relying on twenty-five percent more recycled content than they did during that same time frame. That’s a huge change in such a short period of time and while a twenty-five percent increase in recycled material use may not seem like much it’s enough to have made a difference. That, combined with more efficient methods has really added up.
Whether it’s helping new companies to get their start and creating new jobs or simply slashing expenses in house, the practice of relying on recycled industrial assets has had a huge net impact on the overall state of the environment and the economy. Without these practices the world and the manufacturing industry would be in an entirely different state today and so would most of the planet. Fewer mines are required to obtain raw ore, fewer trees are cut down, less petroleum is utilized, new machinery is no longer as essential and starting a new factory requires less initial capitol. All of these are positive signs that while the bottom line may still be an important part of doing business it doesn’t have to be to the exclusion of turning a profit. This new take on business ethics has trickled into other parts of the business world, inspiring a different kind of business ethics in many different industries.
Disposing of waste is become a crucial topic, because of the will of people to save the earth and make it as green as possible. Waste disposal covers both industries and residences. Industrial waste disposal is much more important, since industries must ensure that their waste does not become prejudicial to other people’s health.
Table of Contents
Recycling and Managing Industrial Waste
Industrial waste, like all other forms of waste, can be quite dangerous. This is because of toxic chemicals and radioactive material found in such waste. As a result, the disposal of industrial waste should be done by professionals. Not only that, the manner and the place where the waste will be disposed of, must be studied and selected with caution. Industrial waste management will constantly consider the protection of the environment. When you compare industrial waste and residential waste, the difference is great. In fact, there is more industrial waste than residential one. The reason is simple: the demand is ever increasing in the production world. Together with that, there is also a scary increase in dangers threatening life and the environment.
There are various ways to get rid of industrial waste. One way is to burn it at a considerable high temperature, until solid materials become gases. With such a process, the energy released can later be used. Though used worldwide, this process is neither the safest nor the greenest, because of the constant emission of harmful fumes. Another way is to compact the waste and move it to specific abandoned areas. There, the waste can be disposed of underground. In order not to leave any evidence of the waste, it is recommended that the ground above is prepared with landscaping.
Compared to the previous way, this one is far reasonable. Here too, fumes are emitted and there is a possibility that the waste seeps into water running beneath the ground. Recycling is by far, the most popular form of residential and industrial waste management. Through recycling, industrial institutions do not only minimize their waste disposal costs, but they are also able to produce new materials from the waste. These recycled materials can, as a result, be sold. For industries that have an eye on the protection of the environment, recycling is best possible industrial waste management method.
Industrial Waste Management: The Equipment
To safely get rid of industrial waste, various industries turn to a couple of waste management equipment. The first of such equipment are the industrial compactors. Can crushers, garbage and waste compactors are the specific forms of industrial compactors. They are often used in processing textiles, fibers and rubbers wastes.
An industrial compactor converts the waste into a material that can be useful, rather than disposing of it altogether. Then, you have industrial balers. This equipment is similar to industrial compactors, in the sense that they handle the secondary processing of the waste. Industrial balers have various forms and shapes. Some of them are automatically tied, while others are simply wrapped. Vertical balers are useful in compressing dry waste such as cardboards and plastics. To dispose of high-volume waste, horizontal balers will be used.
Manufacturers of aluminum cans, paper, plastic bottle and printers will be recommended to make use of industrial balers. Finally, there is the wastewater treatment equipment. Such equipment is highly important in industries, where there are huge amounts of wastewater. These forms of waste should be handled carefully, as they contain toxins and chemicals. For institutions that work with tanks, screens and filters, as well as for sewage treatment plants, wastewater equipment is the ideal tool. All in all, industrial waste management equipment should pass a certain level of standards and certifications.